DLX6 and MSX1 from saliva samples as potential predictors of mandibular size: A cross-sectional study.

INTRODUCTION: Morphologic features of the mandible are influenced by the genes of each individual. Mandible size is important to orthodontists because the mandible is the mechanism by which the lower face influences facial esthetics and dental function. To date, no biological marker has been identified that indicates eventual mandible size. This study aimed to correlate the expression of DLX5, DLX6, EDN1, HAND2, PRRX1, and MSX1 to mandible size. METHODS: Fifty-nine orthodontic patients aged >6 years who had available cephalometric radiographs were studied. Patients were classified on the basis of condylion-to-gnathion measurements. Messenger RNA was isolated from saliva and subjected to real-time quantitative polymerase chain reaction. RESULTS: Threshold cycle values for subjects with small mandibles (>1 standard deviation [SD] from the mean) had the least expression of DLX6 and MSX1. Threshold cycle values for subjects with large mandibles (>1 SD) had less expression of DLX6 and MSX1 than subjects within 1 SD but more than those with small mandibles. CONCLUSIONS: DLX6 and MSX1 are related to mandible development and size. This finding could be used to improve treatment planning for medical and dental professionals seeking to understand the impact of genetics on bone growth.

Three-dimensional mandibular dental changes with aging.

INTRODUCTION: This study aimed to evaluate the 3-dimensional (3D) mandibular dental changes over 42 years using the registration of digital models. METHODS: The sample comprised digital dental models of 8 untreated subjects (4 males and 4 females) with normal occlusion measured longitudinally at ages 17 years (T1) and 60 years (T2). Using 13 landmarks placed on the mucogingival junction, we registered the T2 model on the T1 model. Three-dimensional changes in the position of the landmarks on the buccal cusp tip of the posterior teeth and incisal edge of the central incisors were measured by 2 examiners. Registration and measurements were performed using SlicerCMF (version 3.1; http://www.slicer.org) software. Intra- and interrater agreements were evaluated using intraclass correlation coefficients and the Bland-Altman method. One-sample t tests were used for evaluating interphase 3D dental changes (P <0.05). RESULTS: Adequate intra- and interrater reproducibility was found. From T1 to T2, the mandibular teeth showed significant 3D positional changes. A significant dental eruption relative to the mucogingival junction was observed for the anterior and posterior teeth. Anteroposterior movements of mandibular teeth were not significant except for the right molar that drifted mesially. Transverse movements included slight lingual tipping at canines and premolars regions. CONCLUSIONS: Dental changes in untreated normal occlusion were very slight from early to mature adulthood. The eruption of the mandibular teeth was the most consistent finding. A tendency for mesial movement of molars and lingual movement of first premolars and canines was observed in the mandible during the aging process.

Obstructive sleep apnea and orthodontics: An American Association of Orthodontists White Paper.

The Board of Trustees of the American Association of Orthodontists asked a panel of medical and dental experts in sleep medicine and dental sleep medicine to create a document designed to offer guidance to practicing orthodontists on the suggested role of the specialty of orthodontics in the management of obstructive sleep apnea. This White Paper presents a summary of the Task Force's findings and recommendations.

Long-term stability of maxillary and mandibular arch dimensions when using rapid palatal expansion and edgewise mechanotherapy in growing patients.

OBJECTIVE: The purpose of this study was to assess the long-term stability of rapid palatal expansion (RPE) followed by full fixed edgewise appliances. METHODS: This study included 67 patients treated using Haas-type RPE and non-extraction edgewise appliance therapy at a single orthodontic practice. Serial dental casts were obtained at three different time points: pretreatment (T1), after expansion and fixed appliance therapy (T2), and at long-term recall (T3). The mean duration of the T1-T2 and T2-T3 periods was 4.8 ± 3.5 years and 11.0 ± 5.4 years, respectively. The dental casts were digitized, and the computed measurements were compared with untreated reference data. RESULTS: The majority of treatment-related increases in the maxillary and mandibular arch measurements were statistically significant (p < 0.05) and greater than expected for the untreated controls. Although many measurements decreased postretention (T2-T3), the net gains persisted for all of the measurements evaluated. CONCLUSIONS: The use of RPE therapy followed by full fixed edgewise appliances is an effective method for increasing maxillary and mandibular arch width dimensions in growing patients.

Superimposition of maxillary digital models using the palatal rugae: Does ageing affect the reliability?

OBJECTIVES: The aim of this study was to evaluate the reliability of 3-dimensional maxillary dental changes using two methods of digital model superimposition. SETTING AND SAMPLE POPULATION: The Department of Orthodontics of Bauru Dental School, University of São Paulo and University of Michigan Craniofacial Growth Center. Fifteen subjects with normal occlusion. MATERIAL & METHODS: The sample was composed of digital study models of 15 normal occlusion subjects taken at 13 (T1), 18 (T2) and 60 years of age (T3). Using the software SlicerCMF 3.1, superimposition (registration) was conducted using 9 landmarks placed on the incisive papilla, second and third palatal rugae and 10 mm distal to the third palatal rugae. Two registration methods were compared: landmarks (LA) and regions of interest (ROI). Three-dimensional changes of landmarks on the buccal cusp tip of posterior teeth bilaterally and the incisal edge of the right central incisor were measured by three examiners. Intraclass correlation coefficients and Bland-Altman method evaluated intra- and inter-examiner agreements. RESULTS: Good or excellent intra-examiner agreement was found for T1-T2 and T2-T3 measurements using both registration methods. Inter-examiner agreements were good to excellent for T1-T2 measurements and poor to fair for most T2-T3 measurements. Mean T1-T2 differences were less than 0.5 mm for most measurements. CONCLUSION: Maxillary digital dental models of patients with normal occlusion superimposed on palatal rugae showed an adequate reliability for a 5-year interval comparison using landmarks or regions of interest. Lower than acceptable reproducibility using both superimposition methods was found for a 40-year interval comparison.

The use of tailored subheadings was successful in enhancing compliance with CONSORT in a dental journal.

OBJECTIVES: Efforts to enhance the reporting of clinical trials have intensified in recent years with automated strategies and editorial involvement showing promise in improving compliance with accepted guidelines. This study aimed to evaluate the effectiveness of a concerted approach to adherence to CONSORT (CONsolidated Standards Of Reporting Trials) guidelines in a dental journal. MATERIALS AND METHODS: Following the publication of an exemplar clinical trial on the American Journal of Orthodontics and Dentofacial Orthopedics (AJO-DO) website and related changes to the author guidelines, trial submissions were required to follow a standard format incorporating subheadings mirroring the CONSORT guidelines. Compliance with CONSORT was assessed in initial submissions over a 30-month period. Reporting was compared to submissions of randomized controlled trials (RCTs) which did not include subheadings over the same period. RESULTS: Seventy-one RCTs were submitted to the AJO-DO from January 2014 to June 2016, 49 with subheadings and 22 without. Most CONSORT items (e.g. random sequence generation, allocation concealment and blinding) were more frequently adequately reported when RCTs were submitted with inclusion of subheadings. Overall, reporting quality of the submitted RCTs was 15.2% higher with use of the subheadings format (95%CI: 10.5, 20.0; p<0.001) with a mean overall score of 87.3%. CONCLUSION: Enhanced compliance of submitted RCTs was found with use of a bespoke approach to trial presentation utilizing CONSORT item subheadings. The improvement in initial submissions is particularly encouraging as this arose without input either from peer reviewers or journal editors. This simple approach may have wider applicability.

Longitudinal cephalometric growth of untreated subjects with Class II Division 2 malocclusion.

INTRODUCTION: Our objective was to evaluate the craniofacial growth of subjects with untreated Class II Division 2 malocclusion. METHODS: A mixed longitudinal sample of 39 white Class II Division 2 subjects was analyzed at 5 time points: T1 (6 or 7 years), T2 (9 or 10 years), T3 (12 or 13 years), T4 (15 or 16 years), and T5 (18 or 19 years). They were compared with an age- and sex- matched sample of Class I controls. Seventeen measurements (12 angular, 5 proportional) were computed. Multilevel modeling procedures were used to statistically describe the growth changes and to evaluate group differences. RESULTS: There were no group differences in the relative sizes and anteroposterior positions of the jaws during childhood, adolescence, or early adulthood. Subjects with Class II Division 2 malocclusion demonstrated significantly (P <0.05) smaller mandibular plane angles, smaller palatal-to-mandibular plane angles, larger posterior-to-anterior facial height ratios, smaller gonial angles, smaller cranial base angles, larger interincisal angles, and more retroclined maxillary incisors than did the Class I subjects. The hypodivergent patterns were established early and became more pronounced over time. Group differences in the mandibular plane angle, palatal-to-mandibular plane angle, gonial angle, interincisal angle, and maxillary incisor-to-cranial base angle, as well as the posterior-to-anterior facial height ratio all increased over time; the difference in the cranial base angle remained unchanged over time. Retroclination of the maxillary incisors occurred primarily during the early mixed dentition. CONCLUSIONS: Subjects with Class II Division 2 malocclusion are more hypodivergent and have more upright maxillary incisors than do subjects with Class I occlusion. Hypodivergence establishes itself early and increases progressively through early adulthood; maxillary incisor retroclination occurs early.